Lawn Care

There are two ways lawn grass can be grown. Using grass seeds and without the use of grass seeds. If you want to grow grass without seeds you will use a sod. Sods are found when you dig up a section of grass out using a shovel, trowel and transfer it to reinvigorate growth is a place where there is no growth. You might need quite a number of sods to get the best results. Here is the best guide on how to grow grass without seeds.

Simple Guide on How to Grow Grass without Seeds

This is a simple step by step guide on how to grow grass without seeds. You should follow it to the last point if you want to enjoy the very best results.


Step #1: Pick the Best Grass for Your Climate

Depending on where you live, there are certain grass types that will give you better results than the others. There are two distinct categories of that you could go with: warm season and cool season grass.

Warm seasoned grasses include Bermuda, St. Augustine, and Kikuyu. They are able to survive the brutal heat of the summer and will do very well in the Southern States.

Cool seasoned grasses, on the other hand, will handle cold better than warmly seasoned cousins. They can persevere freezing temps and drought. A popular example is the Kentucky bluegrass.

Step #2: Pick Right Time to Start Preparation

If you prepare at the right time you will plant at the best time. If you plant at the best time, you will have better luck with your growth rate and overall results. This is especially vital if you choose to grow grass without seeds. Here is how to plant seeds.

  • Warm seasoned grass – plant in the late spring
  • Cool seasoned grasses – plant in late summer/ early fall.

Step #3: Test Your Soil Before the Planting

If you are starting a new lawn and you want to go with the sod you’d still want to test the soil. Testing the soil will show you if the soil is in good condition and will give you an idea of how much and what type of lawn fertilizer to use.

Step #4: Prepare the Lawn Soil Firsthand

This is critical for both grass seed planting and if you grow grass without seeds. It triggers healthy growth. The goal of this step is to make the soil loose, rich in organic matter, and able to hold the drainage well. Here is what to do.

  • Clear rocks, debris, pebbles, and roots.
  • Use chemical weed killer to kill weeds.
  • Till the soil and loosen it up. Use hand/ rototiller
  • Mix in compost while tilling to amend the soil.

Step #5: Level the Entire Planting Area

It is important to level the planting area before putting the sod. This will enhance cool drainage. You can use a gardening rake to smooth the entire area. Do this until you get a leveled slope. When telling your lawn soil, make sure you rototill to a depth of about 4 inches as this makes it easy to amend the soil while leveling.

Step #6: Buy Your Sod the Same Day You Intend to Plant

Growing from sod is slightly expensive. Sods will come in rolls. Typically they are grass seedlings that have been grown for little over a year. The roots hold strings together. The stringed up sod can then be spread out in long strips when planting.

Sod wither, spoil and die faster when left on the pallet. So make sure you install your sod the same day you buy them. It is therefore advisable that you purchase as much as you can install in a day.

Step #7: Lightly Water Your Sod before You Roll it Out

Lightly water the sod. Cover it with burlap. Keep it in a shaded area until you are ready to use it out. This keeps the sod from drying out before you install. You should also keep the sod moist and cool while you work with it.


Step #8: Start Laying Out Your Newly Bought Grass Sod

  • Always start laying your sod by the longest rows.
  • Go with a straight edge in the yard to pick the vector.
  • You can use a fence line or driveway to guide your planting.
  • Take care not to step on the sod while you are laying it.
  • You can trim off excess sod using a sharp knife and use to set corners.
  • Always glance back and ensure the sod is smooth as you lay it.

Step #9: Make Sure Your Sod is Laid Out Properly

  • Always lay out the sod tight.
  • Do not leave any spaces between the sod.
  • The sod should be snug near hard surfaces (pavements, bricks)

Step #10: Water Your Newly Planted Sod As You Go

This is very important when you grow grass without seeds. Because you won’t have another chance to come back and water the sod (don’t step on laid sod). You must water as you go.

This process is also very important as newly planted sod need to stay moist. So once you put the first few rows you should give the sod some good watering before pushing on. Pay special attention to the edges. Such areas often dry out fast. In case you find some gaps you should fill them up with small pieces of sod.

Step #11: Pack Down Your Sod

Use a lawn roller to pack down your sod. This process is important as helps to flatten out your sod and in turn pack it firmly into the base of the soil. Make sure you fill the lawn roller with the at least ¾ capacity of water or sand.


If you want to grow grass without seeds on your lawn you should follow these 11 steps that we have given you. They are important and will easily give you the best results with a new lawn.

Affiliate Disclosure

Lawn Dethatcher Guide is a participant in the Amazon Services LLC Associates Program which is an affiliate advertising program designed to provide a means for sites to earn advertising fees by advertising and linking to Amazon, the Amazon logo, AmazonSupply, and the AmazonSupply logo are trademarks of, Inc. or its affiliates.

Solar Lights Powered By Sun!


Real Time Analytics